5
7. Specially made battery: reliable and powerful
a. To support continuous time for 40 minutes and curing time
at 35S and 40S.
When the user sets curing time at 30S/35S/40S often, if there
is no reliable and powerful battery as strongest supporter, the
lamp is easily aging to shorten the life.
b. To ensure the inactive time of 200 hours. If the unit is
nonuse, the unit will have electricity power inside for the duration
of about three months.
c: To guarantee the stability of performance
8. Specially design for eye-protection cover
Eye-protection cover tip
Convenient for curing on the molar teeth.
9. Equipped with radiating fan to ensure the continuous
operation for a long time!
It can guarantee the stability of performance to avoid
over-heat. Not many manufacturers make the unit with radiating
fan inside!
10. Build-in meter on the front of charging base to check the
intensity.
It is fairly obvious to know the light intensity just to see how
many light indicators become bright simultaneously.
6
Inset the light guide to intensity test hole after plug charger
into the outlet of power.
The meter will measure the intensity of LED curing light by
lighting-up the LED indicators. The operator can use the reading
to adjust the curing time.
11. Sleeping Mode
When the unit is no longer in using for 2 minutes, the
handpiece will turn into sleeping mode to save power.
SECTION III. COMPONENTS
①
Curing Program: Soft start to full power
④
Curing Time
②
Curing Program: Full power Beep
⑤
Sound Sign
③
Curing Program: Soft start to half power Battery Sign
⑥
Summary of Contents for DY400-4
Page 1: ......