213141_BA_Multistore_002_INT
11 von 28
06/2015
Design
The Multistore is delivered on a transport frame. For the installation on site, the customer shall provide expert
staff (two or four persons), as well as lifting equipment (fork lift or crane) and the appropriate tools.
-
Open the strapping and remove the packaging film,
Unscrew the fixing screws from
the base plate.
-
Drill dowel bores (ø12mm, 90mm deep) for the
ground anchors delivered as per drawing
-
Clean the boreholes
-
Remove nut and washer from the anchor
and insert the anchor in the borehole
-
Lift the Multistore and
place it carefully on the ground anchors
-
Align the Multistore
-
Place the washers and tighten the nuts
with a torque of T
inst
= 20 Nm.
M12