Original
User manual
170260_BA_INT_007_Fasslifter FW-D (DX)
Page
9 of 24
Issued 10/2016
Operation
3
Setting the functions Lower - Neutral - Ascent
There is a switch on the drum lifter handle that can be set to 3 positions (see Fig. 1):
LOWER =lowering, NEUTRAL = transporting; ASCENT = lifting.
Fig. 1 Fig. 2
If the drum lifter does not respond according to the selected switch position, this can be corrected by adjus-
ting the adjustment screw (5). (see Fig. 2). All 3 switch positions should be tested after adjusting the set-
ting.
NOTICE
Only use on flat, even surfaces.
The operator must ensure that the equipment is suitable for the actual drums to be
transported.
Fig. 3
