10
Shipping Container Information:
The shipping container you received with your Sapphire
®
Portable Diode Laser was specially designed to safely
transport the Laser. In the unlikely event that you need to return the Laser for service or repair, please retain the
original shipping container.
Please check to insure that all items are accounted for.
Installing the Sapphire Portable Diode Laser:
Each of the items listed below should be inspected and the instructions followed. Use of any cables or
accessories other than those provided by Den-Mat Holdings, LLC may damage the device and may result in
increased RF emissions or decreased immunity of the equipment.
Sapphire Portable Diode Laser control module – Plug the AC/DC Power Converter into the wall outlet and
attach the small, low-voltage plug to the jack on the rear of the Control Module.
Power Switch – The power switch for the Sapphire Portable Diode Laser is located on the rear panel of the
Control Module. This switch must be in the “ON” position when the Sapphire Portable Diode Laser unit is to
be used.
Sapphire Portable Diode Laser Handpiece – When the operating key is turned on, the Sapphire Portable Diode
Laser unit will default to STANDBY status, indicated by 0.8 showing in the LASER POWER display and the
CW icon glowing green.
Operating Key Switch – In order to operate the Sapphire Portable Diode Laser unit, the Laser Operating Key
must be inserted into the key switch in the Sapphire Portable Diode Laser Control Module and turned clockwise
to the “ON” position to place the unit in STANDBY status. Prior to leaving the offi ce, your safety offi cer should
check to see that the key switch has been turned off, removed and stored in a safe place.
Footswitch (optional) – A footswitch may be purchased, if desired. To use, insert the plug into the jack on the side
of the Control Module. When the footswitch is attached, the Handpiece ON/OFF button will not function and the
footswitch controls the working beam’s emission.
Contents of Sapphire Portable Diode Laser Shipping Container:
The contents of the shipping container should include the following:
• Sapphire Portable Diode Laser Control Module with Laser Handpiece
• AC/DC Power Converter
• Laser Operating Key
• Fiber Optic Tips, 400 μm/5 pc
• Single-use Barrier Sleeves for Handpiece 25 pc
• Protective Glasses 3 pc
• Safety Sign
• Sapphire Portable Diode Laser Instructions
• Warranty Information
