background image

 

Page 

5

 of 

6

 

 

 
Light Mode #3: Sleep  

 

For children and adults with some sleeping issues to be used in entertainment or playroom prior to sleep 

or in bedrooms if a child is not sensitive to night light based on parents’ judgment.    

 

This mode delicately lulls you towards a deep and restful sleep. Creating a soft and soothing mood, it may 
also be beneficial in case of insomnia.

 

It features slow color transitions ranging from amber to turquoise, with some purple moments. It 
reduces the deep blue color to levels low enough to avoid any potential suppression of melatonin, 

our “sleep hormone”, an effect known to be capable of disrupting our circadian rhythm. The Sleep 

Mode integrates Delta brainwaves of deep sleep (1-4Hz). 

The Sleep mode always starts with a 

light green color.

 

 

HAND SWIPE GESTURES For User Interface CONTROL

 

 

Two ways to Power on device: First from switching ON from Power Surge Protection bar is 
recommended (not supplied). Second method is when light has been turned to OFF position during 
therapy, a simple hand swipe will turn the unit back ON.   
To switch from the Relaxation mode, which is the initial start up mode, simple swipe again and it 
will switch to Balance mode and swipe again to Sleep mode and swipe again to turn OFF. 
 

The 

SensoSphere-Learning Aid

 features hand swipe gestures over North 

pole of sphere for Color Light Therapy device control and  interactivity. 
Sensing starts at around 5cm from the surface of the  sphere and is 
highest on contact with its surface. The dual swipe should be made within 
1 to 3 seconds.   
 

When powered On, the ‘

SensoSphere

Learning Aid

 always starts in 

Relaxation Mode.

 

 

Three cycle states from Relaxation mode →Balance mode → 

Sleep mode 

 Power off 

 

The selected Light Mode can be identified by its initial color:   

Turquoise 

for Relaxation 

Magenta 

for Balancing 

Green

 for Sleep 

 

Audio Sense Control 

Sound 

is captured through a built-in microphone sensing ambient noises or music. 

The Audio or music interface is normally in OFF position to avoid unnecessary noise interfering with 
normal therapy Learning progression. 
However, if you would like to have relaxing music during study period, here is the method to turn 
the Audio Sense interface ON. 

Reviews: