Rev.
A:
January
2015
600-Manual_Pro-X5
RA.docx
Pro-X5
Operator’s
Manual
Page
1
1.
General Safety & Maintenance Information
The DEMTECH Services, Inc. Pro-X5
TM
Thermoplastic Extrusion Welder, hereinafter referred to
as the Pro-X5 or welder, is a high temperature and voltage piece of equipment. Always disconnect
the power source before performing any service and/or maintenance procedures on the welder.
Never pull or carry the welder by the power cord or electrical connection. Always maintain slack
in any extension cords connected to the welder while in operation to avoid damage to the power
connections. Keep hands, fingers and other body parts well clear of the heating element and related
mounting components at all times. Always use the Pro-X5 in a well-ventilated area when welding
materials such as PVC which can produce toxic fumes. Do not inhale toxic fumes when present.
Do not operate near flammable materials of any kind. Do not apply flammable materials, including
liquids, to seam area. Allow welder to cool completely, at least fifteen (15) minutes, before
returning to the shipping/storage case. Protect welder from exposure to rain or standing water.
Never attempt to weld in standing water.
1.1.
Intended Use
The Pro-X5 is intended as professional use equipment and is not intended for sale to the general
public. The total input power of the Pro-X5 is specified as greater than 1 kW although in
lightly loaded conditions the actual power may be less than 1 kW.
The Pro-X5 has been manufactured utilizing the latest technology and current safety standards
and regulations. However, improper use or abuse may lead to hazardous conditions for the
user or other personnel or cause damage to the welder.
Always keep this manual with the welder at or near the location where the Pro-X5 is being
used for quick and easy reference.
