Rev. A, February 2021
Page 6
Pro-Tacker Operator’s Manual
6
Factory Servicing
In the event your Pro-Tacker should require factory service, the entire Hot Air Welder
needs to be returned to the factory. Refer to the following step for preparing the Pro-Tacker
for return. Unless previous arrangements are made, shipping charges and insurance are the
responsibility of the customer. Ship the packaged Pro-Puller to DEMTECH Services, Inc.
at:
DemTech Services, Inc
Ship to address: 6414 Capitol Avenue
Diamond Springs, CA 95619
U.S.A.
