Demon
-MM211
46
4. Switch the Next/last button to adjust the light.
5. After the adjustment is over, press the Mode button to exit.
Set „language selection”
For the procedure, please see “sound effect mode” setting.
Power-off setting
For the procedure, please see “background light period” setting.
Where: “power saving mode” mode means that a period in seconds can be
set. When the unit is stopped, the unit will automatically shut down for power
saving if there no button is pressed before that period. Number 0 means that
this function is disabled.
Where: “Sleep mode” mode means that a period in seconds can be set.
When the unit is stopped, the unit will automatically shut down if no button is
pressed before that period. This function can be used before you are going
to sleep. Note: When the sleep mode is set, it only functions once. After the
unit shuts down, the system will automatically clear the period set. To use
this function again, you must set a period again.
Replay mode
For the procedure, please see “sound effect mode” setting. Where: “ma-
nual mode” means that sentences cannot be broken during A-B repeat. You
can only set break point manually.
“Automatic mode” means that sentences can be broken during A-B repe-
at.(This function can be used to read English with no music)
Contrast adjustment
For the procedure, please see “background light period” setting.
On-line mode
For the procedure, please see “sound effect mode” setting. Some opera-
ting systems (versions before Windows 2K SP4) do not allow a USB disk
to have two drive letters, so “E-space” function is used. You need to select
the current drive letter here, i.e. “single common disk” or “single encrypted
disk”, so that the selected disk will be displayed after the unit is connected
to your PC.