| KULLANMA KILAVUZU – USER MANUAL
18
l
Reel installation and wire loading
Make sure that the torch equipment (spiral and nozzle) is suitable for the welding wire used
and connect the welding torch to the Euro type "Torch Connection Socket" located on the
front panel of the welding machine.
After matching the wire drive reels suitable for the wire diameter and wire type used, fit the
reels to their place in the wire feeder system.
The diameter of the wire used should be
written on the side of the wire drive reel
facing the motor.
For steel and stainless steel welding wires;
"V" type reels should be used.
For aluminum wires;
"U" type reels should be used.
Argon gas should be used.
Torch spiral should be teflon spiral.
For flux cored wires;
"Knurled Groove-V" type reels should be used.
Release the wire feed reel press force spindle by loosening it.
Correctly adjust the press force of the rollers after threading the wire. If the pressing force
is too low, the wire
slips
on the reels; If the pressing force is too high, the rollers will
crush
the wire or the wire will get
jammed
.
l
Connecting output cables
In MIG welding;
Connect the polarity cable and work connection cable coming from the machine to the
machine connection connectors (jack) according to the polarity selection.
-
+
