Demir Dokum Adonis B24, Instructions For Use Manual

Page: 29 / 80

29
(Figure 3)
(Figure 4)
3. Set the thermostatic radiator valves and the room thermostat to maximum value.
4. Turn the CH temperature control knob between min-max until the temperature shown on LCD
and the pressure value disappear.
5. The boiler's control unit will now automatically carry out pre-ignition safety checks before
igniting the burner.
?=
Boiler Controls
The function and operation of the main controls located on the control panel fascia figure 1 is as
follows:
In the position, where pressure value can be seen, the boiler is in stand-by mode (figure 3) and
power supply is ON.
To operate the boiler, the DHW control knob should be turned until the temperature appears and
the pressure value disappears on LCD.
By turning CH control knob, it is possible to change the boiler’s operating mode either from
winter to summer ( ) or summer to winter mode ( ).
*7=
If only DHW symbol ( ) appears on the screen, it denotes that the boiler is ready to operate in
summer mode to only supply domestic hot water. This symbol blinks when the tap is ON.
If there is a requirement to change mode from summer to winter;
Set the temperature by
turning the control knob
between min-max.
When the boiler is in
“Summer Mode”
When the boiler is in
“Summer Mode”