background image

Page 5

ASSEMBLY AND MAINTENANCE INSTRUCTIONS FOR LAWN WIZARD

1.

Remove all parts from the shipping container

Push Sprayer Handle Assembly (See page 6)

2.

Assemble the top handle (#6) and bottom handle (#37) using the handle splicer (#38). four 1/4" x 1-1/2" bolts (#7)
and four 1/4" locknuts (#2).

3.

Fasten the handle assembly into the frame channel on the main frame (#27) using two 1/4" x 1-1/2" bolts
(#7) and two 1/4" locknuts (#2).

Trailer Sprayer Tongue Assembly (See page 8)

2.

Assemble pull tongue (#4) into the frame channel on the main frame (#27) opposite the brass control valves
(#12) using two 1/4" x 1-1/2" bolts (#7) and two 1/4" locknuts (#2).

3.

Attach pull sprayer cable mount (#3) to the pull tongue (#4) using a 1/4" square u-bolt (#5) and two 1/4"
locknuts (#2). (Model TRL52 only)

4.

For the double nozzle boom,

 attach boom mount (#31) and boom wings (#30) to the end of the main frame (#27)

opposite the brass valves (#12) using two 1/4" x 1/2" bolts (#34), two 1/4" nylon flatwashers (#44) and two
1/4"nylon locknuts (#2). Push the 3/8" vinyl hose (#26) onto the 3/8" hose barb (#28).

5.

For the single nozzle boom, 

attach the single nozzle boom (#31) to the main frame using two 1/4" nylon

flat washers (#44), two 1/4" x 1/2" bolts (#34) and two 1/4" locknuts (#2).

6.

On model PSL52 and TRL52 tie the control cables to the handle using plastic hose tie (Not Shown).

7.

Sprayer is shipped with the pump hoses removed from wheel rollers. Before attempting to use sprayer
be sure to reinstall pump hoses (#18)
 by stretching them over the wheel rollers (#21). (See Photo below)

8.

Make sure the suction hoses (#8) are in the holes provided in the top of the tank (#10).

9.

Fill the sprayer tank (#10) with water.

10. All sprayers are equipped with AN10 nozzles (#32) for application at approximately one gallon per 1000 sq. ft.

11. The latex pump hoses (#18) should be checked periodically for signs of excessive stretching and wear.

NOTE: For correct spray pattern the sprayer
            must be pushed or pulled at 2 to 2-1/2 MPH.

12.00

84.00

72.00

Summary of Contents for Lawn Wizard AS20004













Reviews: