Page 10
AB20020
SAFETY
SAFETY SIGN cARE
• Keep safety signs clean and legible at all times.
• Replace safety signs that are missing or have become illegible.
• Replacement parts that displayed a safety sign should also display current sign.
• Safety signs are available from your distributor, dealer parts department, or manufacturer.
how to install safety signs:
• Be sure installation area is clean and dry.
• Decide on exact position before you remove backing paper.
• Remove smallest portion of split backing paper.
• Align decal over specified area and carefully press small portion with exposed sticky backing in place.
• Slowly peel back remaining paper and carefully smooth remaining portion of decal into place.
• Small air pockets can be pierced with a pin and smoothed out using piece of decal backing paper.
Types of safety sign and locations on a HCM Sprayer are shown in the illustration below. Good safety requires
that you familiarize yourself with various safety signs, type of warning, and particular function related to that
area, that requires your SAFETY AWARENESS.
A
B
F
D
E
C
A
AB21014 - Qty.1 Warning observe following Instructions
B
AB21001 - Qty.1 Warning do Not stand on sprayer
C
AG21002 - Qty.1 Caution 20 m.P.h.
d
AA21014 - Qty.1 fresh Water only
e
AB21051 - Qty.2 model hCm
f
AA21012 - Qty. 2 small demco’s
(See Next Page for decal picture)
SAFETY SIGN LOcATIONS
Summary of Contents for HCM
Page 1: ...AB20020 Rev 6 10 20 hcm 300 Gallon Sprayer...
Page 28: ......