DEMAG DC-Com 1, Operating Instructions Manual

Page: 77 / 116

8.5.5.6 Available hoist chains
Genuine Demag chain is a round-section steel chain tested to EN 818-7 which is subject to the regulations for
round-section steel chains used in hoist applications issued by the Main Association of Industrial Employers' Mu‐
tual Insurance Societies, Central Department for Accident Prevention and the test criteria for round-section steel
chains used in hoist applications and the inspection regulations to DIN 685 part 5 of Nov. 1981 as well as BGV D8
and BGV D6.
CAUTION
Pay attention to reduced load capacities.
For non-standard operating conditions, the special chains listed below are available for special ambient condi‐
tions.
Chain hoist
size
Max. load capacity for reeving Dimension Stamp,
chain quality
Weight per
metre
Production
test force
Minimum
breaking
force
Minimum
elongation
at rupture
1/1 2/1
[kg] [kg] [mm] [kg] [kN] [kN] [%]
Demag RDC/TDK standard chain
DC 1 - 2 250 - 4,2 x 12,2
DAT
RDC/TDK
0,38 13,8 22
10 DC 5 500 - 5,3 x 15,2 0,62 22 35
DC 10 1250 2500 7,4 x 21,2 1,20 43 70
Properties
High-strength ageing-resistant material with a high degree of surface hardening, galvanised with additional surface treatment, blue-chro‐
mated, colour: silver
Material Ni-Mo special chain steel to EN 818-7, part 5.3.1
Lubrication GP00H-30REN.SO-GFB grease
Demag Corrud special chain
Application, e.g.
galvanising, electro‐
plating facilities
DC 1 - 2 250 - 4,2 x 12,2
DAT
RDC/TDK
0,38 13,8 22
10 DC 5 500 - 5,3 x 15,2 0,62 22 35
DC 10 1250 2500 7,4 x 21,2 1,20 43 70
Properties Ageing-resistant, corrosion-free, "Corrud DS" micro-layer corrosion protection, black-coated, colour: black, Stabylan 2001
Material Ni-Mo special chain steel to EN 818-7, part 5.3.1
Lubrication Acid-resistant chain grease, e.g. GLEITMO 582
Demag HS7 special chain
Application, e.g.
foundry, dust, em‐
ery, blasting
DC 1 - 2 160 - 4,2 x 12,2
RSX / DS
0,38 12,5 19,3
5 DC 5 400 - 5,3 x 15,2 0,62 19,8 30,8
DC 10 800 1600 7,4 x 21,2 1,20 38,7 60
Properties Ageing-resistant, blue-chromated, with deeper surface hardening
Material Ni-Mo special chain steel to EN 818-7, part 5.3.1
Lubrication Dry or with dry lubricant, e.g. Ceplatlyn 300
Demag RS6 special chain
Application, e.g.
foodstuffs sector
DC 1 - 2
125
23)
- 160
24)
- 4,2 x 12,2
RSA / S
0,38 10 16
15 DC 5
200
23)
- 250
24) - 5,3 x 15,2 0,62 16 25
DC 10
400
23)
- 500
24)
800
25)
- 1000
26)
7,4 x 21,2 1,20 32 50
Properties Non-rusting chain, not hardened, bright
Material Stainless steel AISI 316 (V4A) 1,4401
Lubrication Food-safe lubricant, e.g. Paraliq chain spray
Tab. 55
23)
For max. 25 - 50 cycles per day
24)
For max. 10 cycles per day
25)
For max. 12 - 25 cycles per day
26)
For max. 5 cycles per day
214
80
2 44/291
113
77