background image

5

Instruction manual / Electric screwdrivers DLV 7500 / 7600 / 8500 / 8600 - DLC 1510 / 1520 / 1530 Series

10 - Maintain tools with care

For safe and efficient work, use the proper bit and check it regularly. Inspect tool cords periodically and
if damaged, have them repaired by an authorized service facility. Keep handles dry, clean, and free
from oil and grease.

11 - Disconnect a tool

When not in use, when repairing, when changing accessories and bits, etc...

12 - Avoid unintentional starting

Be sure power switch is off before connecting the screwdriver plug. Do not carry the screwdriver with
the fingers on the switch while the tool is connected to the power.

13 - Do not use a tool violently

Do not swing the tool around and hold the body firmly when using. If not, it may cause injury. Do not
drop or abuse the body. If there is breakage, cracks, or transformation, it may cause injury.

14 - Start alert

Watch what you are doing. Use common sense. Do not use when you are tired. Do not bring hand or
face close to moving parts such as bit etc when in use. Otherwise, it may cause injury.

15 - Check damaged parts

Before further using the tool, a guard, or other part that is damaged should be carefully checked to
determine that it  will operate properly and perform its intended function. Check fo alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect
its operation. A guard, a switch or any other part that is damaged should be properly repaired or
replaced by an authorized service facility.

16 - Use the designated accessories and attchments

Do not use accessories and attchments otherwise than what is mentioned in this operation manual
and/or catalogue. If used otherwise, it may cause damage or injury.

17 - Do not modify this product

We are not responsible for customer modification of the tools and components for application in
which we were not consulted.

18 -

Do not allow the following chemicals to come into contact with the tool housing as damage will result
: acetone, benzene, thinner, ketone, trichloroethylene or other similar chemicals.

Summary of Contents for DLC 1510























Reviews: