Installation
Insert the USB connector of the cable mouse into a USB port on your computer; after detection the
mouse will start working normally.
* Note: Only for the RGB version of the mouse - it comes standard with software so you can adjust
the functions of the buttons and light.
Driver installation
You can download the software from the link below to set up the functions of the RGB version of the
mouse:
http://www.deluxworld.com/en/service/download/
Advice:
Please make sure the mouse is connected to the computer when installing the driver.
Driver setup instructions
After a successful installation, you can enter the settings screen and start adjusting the mouse
functions.
A. Button setting (customization)
You can set the functions of the 7 buttons (G1-G7). You can choose from 10 functions for one button.
Please see Photo A.
For the Mouse function, you can choose from 11 different functions. Please see Photo B.
In several modes you can adjust the brightness of the lights and the speed.
Note:
The Left-click function cannot be set first, but only after another button is set with the Left-click
function.
B. Productivity
By adjusting the coordinate, you can adjust the sensitivity (DPI), cursor speed, and scan frequency.
C. Lights
You can set different lighting mode: All Off, Full Light, Breathable, Floating RGB Mode, Running RGB
Mode, Neon RGB Mode.
