•
Always check whether the site of the installation
can support the weight of the floodlight.
For safety, 1.5 times the weight of the floodlight
is recommended. If you are unsure do not install.
GENERAL INSTALLATION - SAFETY
1. Please make sure you are safe when working at height.
2. Employ the latest safety regulations and procedures to
ensure the safe installation of this floodlight.
3. When positioning your floodlight out of doors please
take note that outdoor electrical installations should
be installed by a qualified Electrician. Correct circuit
protection for all exterior electrical services should
include a residual current device (RCD), also known
as an earth leakage circuit breaker (ELCB). This simple
device ensures that the power is cut off immediately; it
detects a leakage of current to earth, which indicates an
electrical fault which is potentially threatening to life.
Observe these few Simple rules and keep your outdoor
electrical installation safe.
INSTALLATION INSTRUCTIONS
1. Select the required position for the floodlight.
2. Remove the mounting bracket from the floodlight.
3. Fix the mounting bracket to the mounting surface with
appropriate screws and wall plugs, sufficient to take the
weight of the fitting.
4. Replace the main body of the floodlight to the bracket,
ensuring that cables are not trapped between the base
mounting bracket and the floodlight,
5. Connect the floodlight to the mains supply, with an
appropriate junction box or connection fitting, making
sure any exposed connections and joints are sufficiently
weatherproofed. When using with 110V supply make
sure the correct CEE plug is fitted to connect to the
transformer.
6. Then make the electrical connections as follows:
LIVE
- (Red or Brown) to a terminal marked
L
NEUTRAL
- (Black or Blue) to a terminal marked
N
EARTH
- (Green/Yellow) to a terminal marked
WARNING - THIS FITTING MUST BE EARTHED
7. Ensure that there are no exposed conductors, loose or
trapped cable strands.
8. Adjust the angle of the floodlight by the retaining/
adjustment bolt, making sure the bolt is re-tightened.
9. Switch on the power supply to test.
MAINTENANCE
1. Please make sure the power is switched off before
starting any maintenance.
2. In order to maintain good even light coverage, the glass
cover should be cleaned regularly.
3. For good heat dissipation the floodlight housing should
also be cleaned regularly.
4. Please take care when cleaning the glass or floodlight
housing.
DO NOT USE water or cleaning solutions, cleaning should
preferably be done with a clean dry cloth.
MOUNTING
BRACKET
MOUNTING BRACKET
RETAINING/ADJUSTMENT
BOLT
GUARANTEE
This product is guaranteed in the EU for a period of 5 years from the date of purchase. The guarantee is invalid in the case of improper use, installation,
tampering, removal of the QC date label, installation in an improper working environment or installation not according to the current edition of the IEE Wiring
Regulations (BS 7671). Should this product fail during the guarantee period it will be replaced free of charge, subject to correct installation and return of the
faulty unit. Déluce Lighting does not accept responsibility for any installation costs associated with the replacement of this product. Your statutory rights are
not affected. Déluce Lighting reserves the right to alter specifications without prior notice.
DEL0423b/May_2015[issue_2] Page 2 of 2
www.delucelighting.com
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION
LEAVE A COPY FOR THE USER/MAINTENANCE ENGINEER FOR FUTURE REFERENCE
We recommend this fitting is installed by a qualified Electrician.
LED FLOODLIGHT
FITTING INSTRUCTIONS
