INSTALLATION:
CAUTION: DO NOT INSTALL THE ALARM IN NEW OR RENOVATED
BUILDINGS UNTIL ALL WORK IS COMPLETED, INCLUDING PAINT-
ING AND FINAL CLEANING (EXCESSIVE FUMES FROM PAINTS; SOL
-
VENTS, MAY CAUSE DAMAGE AND DIRT OR DEBRIS MAY BLOCK
THE GAS ENTRY).
The CO Alarm is designed for easy installation. It comes completely with
mounting kit. All you have to do is attach the mounting bracket to the wall with
the fixing screws provided.
Loosen the mounting bracket
1.
by pushing it upwards and then
fasten it onto the ceiling/wall
with the enclosed screws.
Connect the battery with + ve
2.
and – ve in the correct position
and close the battery cover.
Hook the alarm on bracket until
3.
it locks in place. Now, test the
alarm by pressing in the test
button for a few seconds until
the alarm sounds.
The CO Alarm should be installed by a competent person.
LOCATION – WHERE TO INSTALL CO ALARM
Minimum Protection
Added Protection
The alarm should be installed in every level of your home, preferably in
•
every room. If this is not possible, install at least one alarm near or within
each separate sleeping area.
If more than one sleeping area or the bedroom doors are closed during the
•
night, you may need more than one CO alarm
For added protection, install at least one CO alarm in each level of the
•
