Charging cable jack
Power button
Instruction on Use
Instruction on Use
Charge the main machine
Pause/turn off the main machine
Automatic cleaning
Turn on the main machine
First, insert one end of the charging cable into the charging cable jack at the front of the main machine, and then insert the other
end into the USB charging head. At this time, the LED light on the panel of the main machine will breathe in green light (please
refer to Item 5 of Notice Before Use)
Press the “power button” for short to run the machine and start automatic
cleaning; then press the “power button” for short to pause cleaning, and then the
machine will be automatically turned off after being put static for 5 minutes. In
the automatic cleaning state, the machine can clean in the designated cleaning
area according to the path set inside the machine.
It can be used for cleaning and vacuuming wooden floors, smooth cement
floors, ceramic tile floors and other hard floors.
Press and hold the “power button” for 3s and the green
light goes out; then, the machine is turned off.
Please use the 5V 1A adapter to charge.
Panel of the main machine
