Delton V1 User Manual Download Page 3

V1

DC7.4V

100-240V~50/60Hz

9.8W

400mL

1800mAh

LED display light

Product Parameters

Notices before Use

Notices before Use

Instruction on Use 

Install the round brush

Press the round brush directly into the central convex 

shaft of the brush base without using tools.

5. LED display light signal

Product name

Battery capacity

Operative norms

Charging time

Working time

Work noise

Product model

Rated voltage

Rated input

Rated power

Charging battery

Lithium-ion battery

Power adaptor output

Capacity of 

dust box

Scope of working 

temperature

Scope of working 

humidity

Full-automatic robot 

vacuum cleaner

1.  In  order  to  give  full  play  to  the  best  dust  collection  function  of  this 

product, be sure to pick up clothes, power cords, extension cords and 

other fragile items scattered on the ground.
As  this  product  will  clean  along  the  edges  of  walls  and  furniture, 

please  remove  or  fix  all  furnishings  and  furniture  that  are  easy  to 

topple and have unstable center of gravity.

2. Please check before use:

* Whether the dust box is full.
* Whether there is dust or foreign matter stuck in the suction inlet.
* Whether there is too much dust inside and outside the suction inlet 

edge  of  dust  box.  After  confirmation,  please  shut  down  the  main 

machine and clean the dust box. After cleaning, please be sure to put 

the filter screen into the dust box correctly.

3. Please put the main machine in an empty place in the room and turn 

on the power switch to start cleaning.

4. Please be sure to turn off the machine when not in use.

Off-ground state

Walking state

Operation Mode

Ground inspection alarm state

Display of LED light

The button light is always on

The button light flashes rapidly

The button light flashes rapidly

The button light flashes twice in a row with an interval of 2s

The button light flashes three times in a row with an interval of 2s

The key light flashes four times in a row with an interval of 2s

The button light breathes

The button light is always on

The button light flashes rapidly for 1s

Low battery 

Fan is stuck 

Side brush is stuck 

In charging state

Fully charged 

Abnormal charging 

Summary of Contents for V1









Reviews: