background image

Rev
. 1

-10
/10
  ING

SAFETY PRECAUTIONS

These warnings are an essential, integral part of the product and must be given to the user. They

provide important indications on the installation, use and maintenance and must be read carefully.

This form must be preserved and passed on to subsequent users of the system. The incorrect

installation or improper use of the product may be dangerous.

INSTALLATION INSTRUCTIONS

• 

  The installation must be performed by professionally skilled personnel and in compliance with

  current local, state, national and European legislation.

• 

  Before beginning the installation, check the integrity of the product.

• 

  The laying of cables, electrical connections and adjustments must be workmanlike performed.

• 

  The packing materials (cardboard, plastic, polystyrene, etc.) are a potential hazard and should

  be disposed of correctly and not left within reach of children.

• 

  Do not install the product in potentially explosive environments or environments disturbed by

  electromagnetic fields. The presence of inflammable gases or fumes is a grave danger to

  safety.

• 

  Set up a safety device for overvoltage, a disconnecting and/or differential switch suitable for

  the product and conforming to current standards.

• 

  The manufacturer declines any and all responsibility for product integrity, safety and operation

  in the event incompatible devices and/or components are installed.

• 

  Solely original spare parts should be used for repairs and replacements.

• 

  The installer must provide all the information relating to the operation, maintenance and use of

  the individual parts, components and system as a whole.

WARNINGS FOR THE USER

• 

  Read the instructions and enclosed documentation carefully.

• 

  The product must be used for the express purpose for which it was designed. Any other use is

  considered improper and therefore hazardous. In addition, the information given in this

  document and in the enclosed documentation may be subject to modifications without prior

  notice. It is given as an indication only for product application. The company declines any

  responsibility for the above.

• 

  Keep products, devices, documentation and anything else provided out of reach of children.

  In the event of maintenance, cleaning, breakdown or faulty operation of the product, cut off the

  power and do not attempt to operate on the product. Contact solely the professionally skilled

  personnel responsible for these operations. Failure to adhere to the above indications may be

  dangerous.

1095 Budapest, Mester u. 34.

Tel.: *218-5542, 215-9771, 215-7550, 

216-7017, 216-7018  Fax: 218-5542

Mobil: 30 940-1970, 20 949-2688

  

1141 Budapest, Fogarasi út 77.

Tel.: *220-7940, 220-7814, 220-7959,

220-8881, 364-3428  Fax: 220-7940

E-mail: [email protected]  Web: www.delton.hu

www.kaputnyitunk.hu

Mobil: 30 531-5454, 30 939-9989

Summary of Contents for CARRERA









Reviews: