LAY BOTTOM FRAME
(C)
ON ITS SIDE ON LEVEL FLOOR. INSTALL FRONT & REAR
SUPPORTS
(A), (B)
TO BOTTOM FRAME (
C
) USING THE M10 x 65MM
CARRIAGE BOLTS (
GG
), M10 WASHERS (
II
), AND M10 LOCKNUTS (
KK
).
INSTALL BOTTOM PULLEY FRAME
(R),
HOLD-DOWN SUPPORT
(M),
AND SEAT
SUPPORT
(J)
TO BOTTOM FRAME (
C
) USING THE M10 x 65MM CARRIAGE BOLTS
(
GG
), M10 WASHERS (
II
), AND M10 LOCKNUTS (
KK
).
TOOLS REQUIRED:
METRIC WRENCHES OR SOCKET SET
Some components may be pre-installed
from the factory
(NOTE: THE NUTS USED ON THIS
BENCH ARE LOCK NUTS, THIS MEANS
YOU MUST TIGHTEN THEM DOWN
PAST THE PLASTIC INSERT.)
A
B
R
M
J
C
GG
I I
KK
