DO NOT TIGHTEN THESE
LOCKNUTS UNTIL AFTER
INSTALLING THE CABLE
TOOLS REQUIRED:
ADJUSTABLE WRENCHES OR METRIC SOCKET SET
INSTALL THE 3-1/2” PULLEYS (P) INTO THE TOP FRAME (C) USING THE PULLEY BUSHINGS
(V), THE M10 x 65MM BOLTS (Y), AND THE M10 LOCK NUTS (BB).
NOW INSERT THE 2” x 3” CAP (U) INTO THE TOP FRAME (C).
U
C
V
Y
P
V
CC
TOP FRAME ASSEMBLY
(NOTE: THE NUTS USED ON THIS
MACHINE ARE LOCK NUTS, THIS
MEANS YOU MUST TIGHTEN THEM
DOWN PAST THE PLASTIC INSERT.)
