GB
37
•
Always keep the implement clean. Do
not use cleaning agents or solvents.
We cannot be held liable for damage
caused by our implements if they were
improperly repaired, if non-original parts
have been used or if they were used not in
keeping with their intended purpose.
Exchanging the cylinder
Switch off the implement, discon
-
nect the mains plug and wait until
the cylinder is standing still.
Wear gloves when handling the
cylinder.
1. Turn the implement over.
2. Loosen the wing screw (25) and pull the
bearing support (27) upwards.
3. Lift the roller (
16/17) diagonally
and pull the shaft out of the hexagon
receptacle (26).
4. Insert the new cylinder (
16/17) by
reversing the sequence.
Storage
•
Store the implement in a dry place well
out of reach of children.
•
Allow the motor to cool down before
placing the implement in a closed room.
•
Do not wrap nylon sacks around the
implement as this could result in the
formation of moisture.
Without wall bracket:
To save space when stored, the
handlebar can be folded down after
releasing the tightening levers.
Ensure that the cables are not
squeezed.
With wall bracket:
You can suspend the folded-up device
from the wall using the wall bracket.
Screw the wall bracket (28) to the
wall with the enclosed screws (29),
using dowels (not included in delivery
package) if necessary. Suspend the
device from the lower bar (6).
Check the tightness of the wall bra-
cket (28) fitting regularly.
Disposal and protection
of the environment
Dispose of the implement, accessories and
packaging in an environment-friendly manner.
Electrically-powered appliances
must not be disposed of with the
domestic waste.
Hand in the spent implement to a recy-
cling centre. The plastic and metal parts
can then be sorted out and graded for re-
cycling. Our Service Center will be happy
to answer any questions in this respect.
Guarantee
•
For the device and the charger, we
provide a 24 month warranty. Commer-
cial use will invalidate the guarantee.
•
Damages, which can be attributed to
natural wear, overloading or inappro-
priate use, are excluded from the
guarantee. Certain component parts
are subject to a normal wear and
are excluded from the guarantee. In
particular, these include: aerator roller
with spring tines, scarifying drum with
blade collection bag.
