EN – User guide
EN:
SE:
0200-877771
FI:
020-7120395
DK:
NO:
You have bought a ceiling mount for a projector up to 15kg. Please follow
the step by step guide on how to mount your projector in the ceiling.
Before mounting
For mounting on concrete and wooden ceilings, please use the included
screws and plugs. For mounting on other type of ceilings, please use
intended screws and plug´s (not included).
In addition to the including screws, plugs and allen wrench you will
need a marker pen, a phillips head screw driver and a suitable drilling
machine.
Please observe that the surface where the ceiling mount will be
mounted shall support the combined weight of the ceiling mount
and the projector.
Make sure that no electrical cables, water pipes or gas pipes are located
where you will drill.
Mounting
Separate the two parts of the ceiling mount and attach the pole
between the ceiling plate and the mounting track.
Hold the ceiling mount to the surface where you want to mount
it. Mark two holes in an opposite position to each other. Now use
appropriate tools and fix the ceiling mount to the ceiling.
Choose the appropriate screws and washers that fits your
projector. Fix the four mounting arms to your projector.
Hook up your projector with the mounting arms to the ceiling
mount and tighten the safety screws located in the end of the
mounting track. Use the allen wrench to adjust the position with
the screws around the ball joint and the pole.
Support
If you experience any problem installing or using this product, don’t
hesitate to contact us. We appreciate it if you have the information
regarding your computer environment at hand; Operating system version
and the item number of your Deltaco product.
Contact us by email: [email protected].
More product and support information can be found at www.deltaco.eu.
1
6
1
2
3
