- 1 -
…………………………………………………………………
ENGLISH
…………………………………………………………………
Thank you for choosing Delta’s TP series product. TP04G-AL/AL2 achieves
improvement in usability. Users can purchase program copy card (optional) to copy
settings and programs quickly and save download time. In addition, the editing software
provides various object icons (bitmaps) to meet various users’ requirements. For best
performance please ensure that TP series product is used with Delta’s power supply
module DVPPS01 or DVPPS02.
a
Please read this instruction carefully before use.
a
Switch off the power before wiring.
a
The display panel of TP04G-AL/AL2 is waterproof. However, please prevent grease,
corrosive liquids and sharp objects from contacting the TP04G-AL/AL2.
a
The TP04G-AL/AL2 requires 24VDC input power. DO NOT connect DC input power
to any of the RS-485 communication port; otherwise serious damage may occur.
Check all the wiring again before switching on the power.
a
DO NOT touch any terminal when the power is switched on. DO NOT touch any
internal circuit in 1 minute after the power is switched off.
a
Make sure the ground terminal
is correctly grounded in order to prevent
electromagnetic interference.
a
Please use the fixed supports accessory which is packed in product package. DO
NOT tighten the screws out of the normal torque specifications; otherwise serious
damage may occur.
Product Outline and Dimensions
y
Front Panel
Power i ndicator
Alarm i ndicator
Displ ay area
Function keys
Escape/Exit key
Up/Down keys
Enter key
Figure1
y
Back Panel
Figure2
Progr am copy card
interf ace
Bat tery
DC power supply
RS-485* )
Communicati on
por t (
COM setting
RS-232/ RS-422* )
Communicati on port
(
＊
: RS-485/RS-422 is only f or AL2 model
3-PIN fixed terminals and 6-PIN
removable
terminals / Wire Gauge:12-24 AWG /
Torque:4.12 lb.-inch
Call 1(800)985-6929 for Sales
deltaacdrives.com
Call 1(800)985-6929 for Sales
deltaacdrives.com
