background image

www.deltaww.com

Industrial Automation Headquarters

Delta Electronics, Inc. 

Taoyuan Technology Center

No.18, Xinglong Rd., Taoyuan District, 

Taoyuan City 33068, Taiwan

TEL: 886-3-362-6301 / FAX: 886-3-371-6301

Asia

Delta Electronics (Shanghai) Co., Ltd.

No.182 Minyu Rd., Pudong Shanghai, P.R.C.

Post code : 201209 

TEL: 86-21-6872-3988 / FAX: 86-21-6872-3996

Customer Service: 400-820-9595

Delta Electronics (Japan), Inc.

Tokyo Office 

Industrial Automation Sales Department 

2-1-14 Shibadaimon, Minato-ku

Tokyo, Japan 105-0012

TEL: 81-3-5733-1155 / FAX: 81-3-5733-1255

Delta Electronics (Korea), Inc.

Seoul Office

1511, 219, Gasan Digital 1-Ro., Geumcheon-gu, 

Seoul, 08501 South Korea

TEL: 82-2-515-5305 / FAX: 82-2-515-5302

Delta Energy Systems (Singapore) Pte Ltd.

4 Kaki Bukit Avenue 1, #05-04, Singapore 417939

TEL: 65-6747-5155 / FAX: 65-6744-9228

Delta Electronics (India) Pvt. Ltd.

Plot No.43, Sector 35, HSIIDC Gurgaon, 

PIN 122001, Haryana, India

TEL: 91-124-4874900 / FAX : 91-124-4874945

Delta Electronics (Thailand) PCL. 

909 Soi 9, Moo 4, Bangpoo Industrial Estate (E.P.Z), 

Pattana 1 Rd., T.Phraksa, A.Muang, 

Samutprakarn 10280, Thailand

TEL: 66-2709-2800 / FAX : 662-709-2827

Delta Electronics (Australia) Pty Ltd.

Unit 20-21/45 Normanby Rd., Notting Hill Vic 3168, Australia

TEL: 61-3-9543-3720

Americas

Delta Electronics (Americas) Ltd.

Raleigh Office

P.O. Box 12173, 5101 Davis Drive, 

Research Triangle Park, NC 27709, U.S.A.

TEL: 1-919-767-3813 / FAX: 1-919-767-3969

Delta Greentech (Brasil) S/A

São Paulo Office

Rua Itapeva, 26 – 3˚ Andar - Bela Vista

CEP: 01332-000 – São Paulo – SP - Brasil

TEL: 55-11-3530-8643 / 55-11-3530-8640 

Delta Electronics International Mexico S.A. de C.V.

Mexico Office

Gustavo Baz No. 309 Edificio E PB 103

Colonia La Loma, CP 54060

Tlalnepantla, Estado de México

TEL: 52-55-3603-9200 

*We reserve the right to change the information in this catalogue without prior notice.

EMEA

Headquarters: 

Delta Electronics (Netherlands) B.V. 

Sales: [email protected] 

Marketing: [email protected] 

Technical Support: [email protected] 

Customer Support: [email protected] 

Service: [email protected]
TEL: +31(0)40 800 3900

BENELUX:

 Delta Electronics (Netherlands) B.V.

De Witbogt 20, 5652 AG Eindhoven, The Netherlands 

Mail: [email protected]

TEL: +31(0)40 800 3900

DACH:

 Delta Electronics (Netherlands) B.V.

Coesterweg  45, D-59494  Soest, Germany

Mail: [email protected]

TEL: +49(0)2921 987 0 

France:

 Delta Electronics (France) S.A.

ZI du bois Challand 2, 15 rue des Pyrénées, 

Lisses, 91090 Evry Cedex, France 

Mail: [email protected]

TEL: +33(0)1 69 77 82 60 

Iberia:

 Delta Electronics Solutions (Spain) S.L.U

Ctra. De Villaverde a Vallecas, 265 1º Dcha Ed. 

Hormigueras – P.I. de Vallecas 28031 Madrid 

TEL: +34(0)91 223 74 20 
Carrer Llacuna 166, 08018 Barcelona, Spain

Mail: [email protected]

Italy:

 Delta Electronics (Italy) S.r.l.

Via Meda 2–22060 Novedrate(CO) 

Piazza Grazioli 18 00186 Roma Italy

Mail: [email protected]

TEL: +39 039 8900365

Russia:

 Delta Energy System LLC 

Vereyskaya Plaza II, office 112 Vereyskaya str.

 

17 121357 Moscow Russia 

Mail: [email protected]

TEL: +7 495 644 3240

Turkey:

 Delta Greentech Elektronik San. Ltd. Sti. (Turkey) 

Şerifali Mah. Hendem Cad. Kule Sok. No:16-A

 

34775 Ümraniye – İstanbul

Mail: [email protected]

TEL: + 90 216 499 9910

GCC:

 Delta Energy Systems AG (Dubai BR)

P.O. Box 185668, Gate 7, 3rd Floor, Hamarain Centre 

Dubai, United Arab Emirates 

Mail: [email protected]

TEL: +971(0)4 2690148

Egypt + North Africa: 

Delta Electronics

Unit 318, 3rd Floor, Trivium Business Complex, North 90 street, 

New Cairo, Cairo, Egypt 

Mail: [email protected]

RTU-ECAT

EtherCAT Remote IO 

Communication Module 

Operation

 Manual

DVP-2212920-01

 

10/04/

2020

Summary of Contents for RTU-ECAT
















































































Reviews: