1. Safety
The following symbols mean:
Caution!
Read these operating instructions fully before use and pay particular attention
to sections containing this symbol.
GENERAL SAFETY
Operation of the unit must be carried out according to the given operating instructions.
The unit should be saved from shocks and falling.
After transport or storage in humid conditions dry out the unit (2-3 hrs) before connecting it to
the mains power supply.
Do not make modifications in design of the unit.
ELECTRICAL SAFETY
Connect only to a power supply with a voltage and polarity corresponding to that on the serial
number label.
Ensure that the mains connector is easily accessible during use.
Before moving the unit, disconnect the power supply units from the mains.
If liquid is spilt inside the unit, disconnect it from the mains power supply and have it checked
by a competent person.
DURING OPERATION
Do not operate the unit in premises with aggressive or explosive chemical mixtures.
Do not operate the unit outside the laboratory premises.
Do not operate the unit which have not been correctly installed or repaired.
Take all necessary precautions to ensure safe operation.
Do not leave the operating unit unattended.
BIOLOGICAL SAFETY
It is the user’s responsibility to carry out appropriate decontamination if hazardous material is
spilt on or inside the equipment.
Digital differential cell counter
μDCC-100
Page 3
Operating instructions
