Delta M812-FX Series Manual Download Page 61

Page: 61 / 65

M81E / M81DC2 / M812-FX Series User’s Manual

Audio Driver For 810(E) Installation

This folder let you select the drivers for the audio system that is integrated on this
motherboard. Drivers are provided for Windows 95/98, and NT4.0.

Click “

Audio Driver For 810E

” on the Figure 2, the screen will appear Figure 13.

(Install the Audio driver from sub-folders for Windows 95/98, and NT4.0)

Click “

Audio Driver For Win98

” on the Figure 13, the screen will appear Figure 14.

The installation program will now guide you through the rest of the installation process.
When completed, the screen will back to Figure 13.

Figure 13 Figure 14

View device through the Device Manager under Windows 98.

Go to “

My Computer

” then double click on the “

Control Panel

”, the screen will

appear Figure 9.

Double click on the “

System

” icon

→

Select “

Device Manager

”

→

Click on “

”

symbol to the left of the “

Display adapters

”, the screen will appear Figure 15. High-

light the “

Audio Driver For Win 98

” driver is installed successfully.

Or refer to explain of “

Audio Readme

” on Figure 13.

Figure 15

Summary of Contents for M812-FX Series


































































Search results

Summary of Contents for M812-FX Series

Reviews:

Related manuals for M812-FX Series

Brands by name

Popular brands

Delta M812-FX Series, Manual

Search results

Summary of Contents for M812-FX Series

Reviews:

Related manuals for M812-FX Series

Brands by name

Popular brands