5 Planning the installation
Installation location
Installation and Operation Manual M125HV EU V3 EN 2021-07-12
26
5.
Planning the installation
This chapter describes only the
planning
of the
installation work. The
execution
of the instal-
lation work and the associated dangers are
described in the "Installation" chapter.
5.1
Installation location
5.1.1 Requirements for the Wall and Mounting
System
Fig. 5.1:
Recommended feeding of the AC cable with strain
relief when wall mounting
Fig. 5.2:
Recommended feeding of the AC cable with strain
relief for ground mounting
►
The inverter is suitable for wall and ground mounting.
► When installing the inverter, always allow sufficient space
below so that the AC cable can be easily inserted into the
inverter.
►
The inverter is very heavy. The wall, ground and mount-
ing system must be able to bear the heavy weight of the
inverter.
►
Always use the mounting plate supplied with the inverter.
►
Use mounting materials (dowels, screws etc.) that are
suitable for the wall or the mounting system as well as the
heavy weight of the inverter.
►
Mount the inverter on a vibration-free wall to avoid disrup-
tions.
►
When using the inverter in residential areas or in buildings
with animals, possible noise emissions can be disturbing.
Therefore, choose the installation location carefully.
► Mount the inverter on a fireproof wall.
