Triplex Real Time Stand Alone DVR
9
3.1 FRONT PANEL
1. 1 to 16 Channel Selection / Direction
• To select a channel to be viewed as full-size screen during live display or playback.
• To navigate
in the menu
, press Up(CH1) / Down(CH2) / Left(CH3) / Right(CH4).
2 ~ 5. LED Signs
• There are four LED signs that indicate current status.
2. POWER
: DVR power status
3. NET
:
ON means that LAN cable is connected and it is ready to transfer information via network.
If user accesses to the DVR via network, network icon ( ) is showed
in the upper right side of screen.
If someone accesses to the DVR via network, LED light turns on.
4. PLAY
: ON means the DVR is in search mode of playback.
5. REC
: ON means the DVR is on recording.
6. Remote Controller Sensor
7. MULTI
• It converts to live display mode directly.
• To surf various live display modes like 16CH, 13CH, 9CH, 8CH and 6CH display
by pressing the button repeatedly.
8. PIP
• To convert to PIP mode (Picture in Picture ).
• To surf various PIP modes like 1PIP, 2PIPs and 3PIPs by pressing the button repeatedly.
9. AUTO
• To convert to auto sequence mode.
• If you press AUTO on the front panel, channels will be automatically switched as follows.
- Ch1 -> Ch2 -> Ch3 ->….-> Ch14 -> Ch15 -> Ch16 -> 16Ch in CIF -> Ch1 -> Ch2 …
keeping this order until you press Auto button again to release the function.
CHAPTER 3. NAMES AND FUNCTIONS
1
2
3
4
5
6
9
7
8
10
11
17
20
19
18
13
14
15
16
12
21
