Triplex Real Time Stand Alone DVR
77
CHAPTER 11. Q & A
☞
Check if the power cable is connected correctly.
☞
Check if the input voltage is correct.
☞
If the system power does not turn on when the power cable is connected correctly,
please contact the local distributor or manufacturer.
1
The system power does not turn on.
☞
Check if the monitor power cable is connected properly
☞
Check to make sure the monitor is turned on.
☞
Check if the video output cable of the DVR is properly connected to the monitor.
☞
Unplug the power cable and plug in again.
2
The system power is turned on, but no video is displayed on the monitor.
3
The camera numbers are displayed on the screen, but camera images are not displayed.
4
The camera video is shown on the screen, but the system doesn’t record video.
☞
Check if there is a recorded video data at the time that you are trying to search on the table.
☞
If there is no recorded video data, check to make sure the recording mode in the recording
setting mode is not set to “NONE”.
5
It is impossible to search through the recorded video.
☞
Check if the camera video output is connected to the DVR system correctly.
☞
Check if the power cable on the camera is connected correctly.
☞
Check if the video cable connecting the camera to the DVR system has a problem.
☞
This problem can occur because of weak video signal if the video is coming through
the video splitter when the video is connected to multiple systems. Connect the camera
directly to the DVR.
☞
Turn off DVR system and turn it on again.
☞
Check to make sure the recording mode in the recording setting mode is not set to “NONE”.
☞
Turn off the DVR and turn it on again.
