Part no.:
Delta model no.: HEH030BB
Page 4
2.
Use this unit only in the manner intended by the manufacturer. If there
is any question please contact the manufacturer.
3.
Install the heater in accordance with the instructions in this installation
manual. Improper installation may result in damage, electric shock or
fire.
4.
Make sure that all wiring is secured, that specified wires are used,
and there is no strain on the terminal connections or wires.
5.
Before serving or cleaning unit, switch power off and disconnect
power supply.
6.
When cutting or drilling into wall or ceiling, do not damage electrical
wiring or hidden utilities.
7.
Be sure to use only the specified accessories and parts to complete
installation.
8.
Protective grounding connection: The enclosure must be grounded at
the protective ground terminal. Use recommended wire and use
spring washer to avoid loosening.
9.
To reduce the risk of electrical shock: Means for disconnection must
be incorporated in the fixed wiring in accordance with the wiring rules.
10. This appliance is intended for use only by qualified personnel.
Caution:
Do not use these electric heaters in dusty, dirty, corrosive, or hazardous
locations. Adequate protection must be taken to protect people from
potential burns and to protect other components from this heat. Always allow
the heater to cool before touching it. Thermal sensitive devices or materials
may need to be located further from the heater than the minimum
recommended distance. Heaters must not be installed on wood or other
combustible surfaces. This heater must only be installed in a totally
enclosed enclosure.
1.
Do not allow children to touch it. Avoid placing any object on it.
2.
Do not block the air inlets or exits.
