4.8.4 CAN(DD) Connection (optional)
4.8.5 Sync signal connection of VSG function
For multiple H5E system application during off-grid, VSG function can synchronize
standalone output power and the system will balance battery energy if the battery
SOC (State Of Charge) is too low. For further information about this application,
please refer to
Chapter 6
.
For this application, please follow the instruction below to connect the function port
terminal of each H5E_220.
CAN-H (VSG)
PIN 1
Multi Function
PIN 2
GPIO-IN (VSG)
CAN-L (VSG)
GPIO-OUT (VSG)
CAN-H (DD)
PIN 7
Multi Function
CAN-L (DD)
BX6.3_DD
Communication
connector
VCC GND CAN+ CAN-
Figure 4-12 : Connection of VSG function
25
Installation and Wiring
