9
For your own safety, do not connect the machine to the power source until the machine is
completely assembled and you read and understand the entire instruction manual.
1. Attach the adjustable tool rest (A) Fig. 1 to the left
side of the tool rest arm (B), and fasten with one
5/16 -18 x 3/4" hex head bolt (C) and 5/16" lock-
washer (D) in the threaded hole. Attach the other
tool rest to the right side of the other tool rest arm.
Leave the bolts loose for further adjustment.
2. Attach the left tool rest assembly (D) Fig. 1 to the
inside of the left wheel guard (E) Fig. 2. Fasten with
two 5/16 -18 x 5/8" bolts (F) and 3/4" flat washers
(G).
A
3. Attach the right tool rest assembly to the inside of right wheel guard and fasten with two 5/16 -18 x 5/8" hex head
bolts and 3/4" flat washers.
4. Each tool rest assembly is adjustable. Position them slightly below the centerline of the wheel and as close to the
grinding wheel as possible. Maintain a distance of 1/8" or less between the grinding wheel and the inside edge of
the tool rest. As the wheels wear down, adjust the tool rest accordingly. When the tool rest is positioned correctly,
tighten the bolts (C) and (F) Fig. 2.
NOTE:
If you grind “freehand” (grinding without the use of a tool rest), use the lower quarter of the wheel.
TOOL RESTS
D
B
C
Fig. 1
Fig. 2
B
C
G
E
F
ASSEMBLY
ASSEMBLY TOOLS REQUIRED
ASSEMBLY TIME ESTIMATE
Wrench (supplied)
Less than 1 hour
