eZNT-Wi Programmable Wi-Fi Thermostat Application Guide
Edition 1.4
Page 125 of 126
Document Revision History
Document
Edition
Number
Date
Published
Change Description
1.0
June 30,
2019
First Release of document for eZNT-WI Beta
Release. This is an early Beta document and has
not been through an extensive review and revision
process.
1.1
September,
2019
SSID for a eZNT-Wi is eZNT-447E not eZNT-Wi-
447E. AV506 is USB_WebserverEnable and AV96 is
Main LAN Network Number in eZNT-Wi. Manual
Calibration mode for the CO2 sensor is the default.
Number of LCD objects is 1 for MS/TP devices and 5
for Wi-FI devices. Current Chameleon Android NFC
App is 1.50.002+. Revised Appendix: enteliZONE
Thermostat Setup Using an Android NFC App, and
Appendix: Calibrate an enteliZONE eZNx CO2
Sensor. Revised CLb fields for onscreen
configuration menu and also AV511/512 object
information for improved CO2 calibration. Added
Appendix: Licensing for Open Source and Third
Party Components.
1.2
December
23, 2019
Guide for eZNT-WI full Release. Wi-Fi signal
strength content for router (rOU) menu
configuration item changes. In Database Objects
section, added AV94 Wi-Fi RSSI which shows on
the display for eZNT-Wi and also eZNTW-Wi. In
Button / Screen GCL Programming section, added
that the slider now sounds a beep when pressed.
Included improved support for USB micro port
connection with enteliWEB. Revised Database
Operations and Calibrate an enteliZONE eZNx
Sensor appendixes. Added Licensing for Open
Source and Third Party Components appendix.