71
/
85
Quick location: <SIT>in the middle of the direction arrows, make sure the protocol support this
function, only mouse control. Click any point, PTZ will turn to it and move it to the centre of screen
Mouse drag on quick location page, support 4 ~ 16 times variation, drag from top left to bottom right
to zoom in box , drag from bottom right to top left for zoom out box .
Advanced
Function
Click page switch into the advanced function, as shown in Diagram 6‐4 PTZ‐Advanced
【
Preset
】
: Input the wanted preset number which has been recorded. Then click the preset button to
call the function.
【
Tour
】
: Input the tour number and click “tour” to run it or stop tour by “stop” button.
【
Patrol
】
: Input the patrol number and click “patrol” to on the function. The camera will work under
the created patrol path. Right click to hide the menu.
Click the direction key in menu to stop the patrol.
【
Line
】
: Click “line” call the line scan function as per set line to scan, the button will turn to
【
Stop
】
, if
you want to stop the motion, click it.
DIAGRAM 6‐4 PTZ‐ADVANCED
AUX
Click “Page Switch” to enter the AUX interface. (Corresponding with protocol) Diagram 6‐5 Aux
function
