4
7.
Remove Plastic Electrical Tee Fitting
7.4
Cleaning Quartz Tube
7.5
Re-installing Quartz Tube Assembly
8.0
UV Bulb Removal/Replacement
8.
Electrical Connector Assembly Removal
8.
Removing The UV Bulb
8.
Removing the Bulb Cushion and O-Rings
8.4
Install Acorn Nut
8.5
Check For Leaks
9.0
UV Bulb Installation
9.
Seating Bulb End Cushion
9.
Installing O-Rings On Bulb End
9.
Connecting Bulb Pins To Bulb Connector
9.4
Inserting Bulb Into Quartz Tube
9.5
Making Electrical Connection To Bulb
9.6
Reinstall The Electrical Enclosure Bonnet
9.7
Plug UV Unit Into Electrical Power
9.8
Providing Power To EA Unit
0.0 Maintenance – Scheduled Bulb Replacement
0. Annual Reminder
0. Disconnect The Power Cord
0. Remove Electrical Enclosure Bonnet
0.4 Remove The Bulb
.0
Additional UV Unit Maintenance
.0 Normal Operating Results
. Ponds
. Swimming Pools, Fountains, Water Features, Waterfalls
.0 Winterizing
. Freeze Damage
. Freezing Weather Precautions
4.0 Swimming Pool Chemicals
5.0 How To Obtain Service
6.0 Parts Schematic and Part Numbers
7.0 Frequently Asked Questions
7. Salt Water Use
7. Filter Cleaning
7. Time Clock Operation
7.4 Residual Effect From UV
7.5 Horizontal Mounting Of UV Unit
7.6 Below Water Installation
7.7 Multiple UV Units For Larger Installations
7.8 GFCI (Ground Fault Circuit Interrupter) Necessity
8.0 Troubleshooting
8. UV Bulb Will Not Light At Startup
8. UV Bulb Was Lit, But Is Not Lit Now
8. UV Bulb Stays Lit When Pump Is Off
8.4 Water Is Green
8.5 GFCI Trips
8.6 Unit Makes Noise When Operating
8.7 Water Leaks From Electrical Enclosure Bonnet
19.0 Specifications
Summary of Contents for ELEKTRA UV E Series
Page 19: ...19 NOTES...
