Document Edition 1.9
Page 1 of 12
INSTALLATION & APPLICATION GUIDE
Delta Network Sensor: BACstat I
DNS-14 (Rev 1.6)
Document Edition 1.9
Product Description
The
DNS-14 BACstat I
is an intelligent room sensor with four buttons and
a 3-digit LCD display that is used with Delta’s product line of BACnet
Application Controllers. It is capable of communicating on Delta’s
proprietary LINKnet network or directly on a BACnet MS/TP network
using the MS/TP BACnet protocol.
When connected to an Application Controller on a LINKnet network the
DNS-14 provides programmable remote sensor capabilities to the
controller. Up to 12 devices may be connected to the LINKnet network,
depending on the controller, where associated BACnet objects located in
the Application Controller make the DNS-14 accessible to the rest of the
system. These same objects in the Application Controller are used in
programming each DNS-14 for various functions and applications.
When connected on an MS/TP network the DNS-14 functions as an independent
Native
BACnet sensor
device, similar to any other MS/TP device. Each DNS-14 is configured for operation (including the use of its
buttons and display), and can receive commands for mode and setpoint changes from another device across
the network (i.e., DCU or other System Controller with V3.22 firmware).
Model Numbers
Product Number
Product Description
DNS-14
Standard Model (with default button template)
The appended button template codes specify the desired icons embossed on the template as follows:
[
default
]
Bottom 2 buttons are
▼
and
▲
(Setpoint Adjust), top 2 are
OFF
and
ON
INT
Bottom 2 buttons are
▼
and
▲
(Setpoint Adjust), top 2 are
O
and
I
–
International
Package Contents
•
Delta Network Sensor:
BACstat I Product,
DNS-14 (Rev 1.6)
•
DNS-14 (Rev 1.6)
Installation Guide
