Operating voltage
24 VAC ±20%
Frequency
50/60 Hz
Power consumption
Running:
DCM24-132, DCM24-132-ZA
5 VA/4W
DC24-132-T, DC24-132-T
3 VA/3W
Holding:
DCM24-132, DCM24-132-ZA
1 VA/1W
Equipment rating
Class 2, in accordance with UL/CSA
Class III per EN 60730
Input signal (wires 8-2) DCM24-132, DCM24-132-ZA
Voltage-input
0 to 10 Vdc (max. 35 Vdc)
Input resistance
>100K ohms
Position output signal (wires 9-2) DCM24-132, DCM24-132-ZA
Voltage-output
0 to 10 VDC
Maximum output current
±1 mA
Running torque
132 lb-in (15 Nm)
Maximum torque
265 lb-in (30 Nm)
Runtime for 90° opening or closing
60 Hz
125 seconds
50 Hz
150 seconds
Nominal angle of rotation
90°
Maximum angular rotation
95°
Shaft size
1/4 to 3/4-inch (6.4 to 20.5 mm) dia.
1/4 to 1/2-inch (6.4 to 13 mm) square
Minimum shaft length
3/4-inch (20 mm)
Enclosure
NEMA 1
IP54 according to EN 60 529
Material
Die cast aluminum alloy
Gear lubrication
Silicone free
Ambient temperature
Operation
-25°F to 130°F (-32°C to 55°C)
Storage and transport
-40°F to 158°F (-40°C to 70°C)
Ambient humidity (non-condensing)
95% rh
UL60730 (to replace UL873)
C-UL certified to Canadian Standard
C22.2 No. 24-93
Control signal adjustment (-Z Models)
Offset (start point)
Between 0 to 5V
Span Between
2 to 30V
Dual auxiliary switches (A Models)
AC rating
24 to 250 Vac
AC 6A resistive,
AC 2A general purpose
DC rating
12 to 30 Vdc
DC
2A
Switch Range
Switch A
0 to 90° with 5° intervals
Recommended range usage
0 to 45°
Factory setting
5°
Switch B
0 to 90° with 5° intervals
Recommended range usage
45 to 90°
Factory setting
85°
Switching hysteresis
2°
Feedback potentiometer DCM (Modulating Units)
0 to 1000 ohm <10 mA
Voltage
UL-Class 2 (SELV/PELV for CE)
Pre-cabled connection
18 AWG
Cable length
3 feet (0.9m) length
Life cycle
Designed for over 50,000 full strokes
at rated torque and temperature
Dimensions:
Inches (mm) 8-3/8 H × 3-1/4 W × 2-2/3 D
(212 H × 83 W × 68 D)
Weight
2.2 lbs. (1 kg)
Power Supply
24 VAC
Control Signal
Feedback Signal
Function
Mounting
Housing
Ambient Conditions
Agency Certification
Auxiliary Features
Miscellaneous
Specifications
PAGE 2