15
5.3
IP search
Connect a network cable to the meter's “PING/Port flashing” port, press key to “IP Scan” icon and enter to app
interface.
Press key to “Set IP” function, press to set the tester’s IP address, the tester’s IP address must be
same network segment with the scanned network equipment, and select the “Scan” and press confirm key, then can
quickly search the IP address of the IP camera or other equipment connected to the tester.
5.4
NetSpeed
Connect a network cable to the meter's “ RJ45” port, press key to “NetSpeed” icon and enter to app interface.
Connected to the tested IP camera or Ethernet device to tester, the top of the screen shows "network succeeded",
can automatically detect and identify information such as connection speed and duplex mode. If it says "network
failed", please check whether the connection port is correct and whether the connected device is working normally.
6.
Video level meter test
The Level value is an important indicator reflecting the signal quality and strength of the coaxial HD video image.
The meter detects the peak, sync and burst level of TVI, CVI, AHD, CVBS video signals in real time. Connect the
CVI/TVI/AHD/CVBS camera to tester’s “LEVEL” port.
