12
4.3
TDR 2.0 Test (Optional)
Note: The testing cable can't be connected to any equipment, otherwise it will damage the tester.
Connect Alligator clip cable to the TDR port, and the cable must connect well before testing, otherwise it will
influence the accuracy. Connect the network cable to tester’s TDR2.0 port.
Press key to RJ45 TDR icon and enter the interface. Built-in BNC cable, network cable, RVV control cable,
Telephone line and TVVB cable etc can test. 4 groups user-defined cable can be set.
If want to test “UTP CAT 5E (4 pair) or UTP CAT 6E (Pair)”, please connect the cable to “TDR 2.0” port.
When select user-defined to test, please press key to adjust the cable speed.
User-defined calibration: Prepare one piece calibrated cable, the cable length must be over 50 meters, the better
length is about 100-200 meters. Enter cable type interface, and select “User-defined”, total has 4 groups
