MODELS
SMT150LED
Page 4.
3. Insert the mounting springs into the slots and mount the grille
to the body. (Fig. J)
LED light connector
Grille
Celling
Fig. I
Slots
Spring
Fig. J
Operation
1. Turn the POWER switch on/off to operate the fan / LED light /
LED night light. The LED indicator will be green when the fan is
turned on.
MAINTENANCE
WARNING:
Disconnect the power source before working on the unit. Routine
maintenance must be done every year.
CAUTION:
1. Never use gasoline, benzene, thinner or any other such
chemicals to clean the ventilating fan.
2. Do not allow water to enter the motor.
3. Do not soak resin parts in water over 140°F (60°C).
CLEANING
1. To remove the grille, pull down the spring and power connects
of the LED light engine.
2. Wash and clean the grille carefully. CAUTION: Do not let water
into the LED light engine. (Use non-abrasive kitchen detergent
and wipe dry with a clean cloth.)
3. Remove dust and dirt from the ventilating fan.
4. Using a cloth dampened with non-abrasive kitchen detergent,
remove any dirt from ventilating fan. Wipe dry with a clean
cloth.
5. Replace the grille.
DIMENSIONS
11.375"
(289)
10.5"
(267)
7.675"
(195)
6"
(150)
14"
(356)
14"
(356)
SPECIFICATIONS
Model No.
Voltage
(V)
Frequency
(Hz)
Power
@ 0.1
”
SP
(W)
Air Flow
@ 0.1
”
SP
(CFM)
Weight
(lb.)
Power
(W)
Note
SMT150LED
120
60
17.6
150
10.4
50
Single
Speed
Note: Design and specifications subject to change without notice.
WARRANTY
DELTA ELECTRONICS THREE YEAR LIMITED WARRANTY
Delta Electronics Inc.
(“Delta Electronics”)
warrants to the original consumer purchaser in
the USA and Canada that the Breez ventilation fan products will be free from defects in material
or workmanship. This warranty is limited to three (3) years from the original date of purchase.
Limitations and Exclusions
1. During the warranty period, a replacement for any defective product will be supplied free of
charge for installation by the consumer. The warranty provided herein does not cover
charges for labor or other costs incurred in the troubleshooting, repair, removal, and
installation service.
2. All returns of defective parts or products must include the product model number, and must
be made through an authorized Delta Electronics distributor. Authorized returns must be
shipped prepaid. Repaired or replacement products will be shipped by Delta Electronics
F.O.B. shipping point.
3. Delta Electronics shall not be liable for any indirect, incidental, consequential, punitive, or
special damages arising out of or in connection with products use or performance,
regardless of the form of action whether in contract, tort (including negligence), strict product
liability or otherwise.
4. This warranty does not extend to fluorescent lamp starters and tubes.
5. The warranty does not cover if user does not comply with manufacturer
’s i
nstallation
manual.
6. To qualify for warranty service, you must notify Delta Electronics at the address or telephone
number below.
7. Delta Electronics shall have no liability to the original owner-user with respect to any defect
caused by abuse, misuse, neglect, improper transportation or storage, improper testing,
improper installation, improper operation, improper use, improper maintenance, improper
repair, improper alteration, improper modification, tampering or accident of products or parts
thereof, or unusual deterioration or degradation of products or parts thereof due to a physical
environment beyond the requirements of products’ specifications.
Address: 46101 Fremont Boulevard, Fremont, CA 94538
US Toll Free Number: 1-888-979-9889
Unit: Inches(mm)
