SPECIFICATIONS
Model No.
Voltage
(V)
Frequency
(Hz)
Power
@ 0.1SP
(W)
Air Flow
@ 0.1SP
(CFM)
Weight
(lb.)
Note
SMT150-200
120
60
24
200
10.4
Single Speed
SMT150-200LED
25
10.7
Single Speed
13 Watts, 850 Lumens,
3000K, 4000K, 5000K
Note: Specifications subject to change without notice.
TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The fan is not turning on
1. Power off
2. Faulty switch
3. Faulty wire connection
1. Make sure power supply is on.
2. Test or replace switch.
3. Check wire in switch box.
The fan seems louder than it
should
1. CFM too great
2. Damper not working properly or
damaged
3. Bend in duct too close to fan
discharge
4. Fan discharge reduced to fit
smaller duct
5. Fan body not securely attached
1. Be sure the CFM rating on the fan matches the
size of your room.
2. Check damper to ensure it is opening and
closing properly. If the damper has become
damaged, please call Customer Service.
3. Be sure you do not have any sharp bends in
duct closer than 18 in. to the fan discharge.
4. Use recommended size ducting to reduce fan
noise.
5. Be sure the fan is securely attached to your
ceiling joists.
The fan is not clearing the
room
1. Insufficient intake airflow within
room
2. Insufficient CFM
1. Be sure a door or window is slightly ajar or
opened to allow airflow. The fan is not able to
draw air out of the room without enough
airflow to draw in from.
2. Be sure the CFM rating on the fan matches the
requirements for your room size.
The light is not turning ON
1. Power off
2. Faulty switch
3. Faulty wire connection
1. Make sure power supply is on.
2. Test or replace switch.
3. Check wire in switch box.
Page 4.