MODEL:
ITG80RLED-ADJ
7 1
/2
5 3/4
11
4
/
5
1
1
/
2
UNIT: inch
∅
4
Fig. I
Fig. J
Fig. K
OPERATION
Turn the power switch ON/OFF to operate the fan/LED
light.
MAINTENANCE:
Disconnect the power source before working on the
unit. Routine maintenance must be done every year.
CAUTION:
1.
Never use gasoline, benzene, thinner or any
other such chemicals for cleaning the
ventilating fan.
2.
Do not allow water to enter the motor.
3.
Do not soak resin parts in water over 140 °F
(60°C).
CLEANING:
1.
Pull down the spring to remove the grille.
2.
Wash and clean the grille. (Use non-abrasive
kitchen detergent and wipe dry with a new
cloth.)
3.
Remove dust and dirt from the ventilating fan
using a vacuum cleaner.
4.
Using a cloth dampened with kitchen detergent,
remove any dirt from the ventilating fan. Wipe
dry with a new cloth.
5.
Replace the grille.
SPECIFICATIONS
Note: Design and specifications are subject to change without
notice.
DIMENSIONS
WARRANTY
DELTA ELECTRONICS THREE YEAR LIMITED
WARRANTY
Delta Electronics Inc.(“Delta Electronics”)
warrants to the original consumer purchaser in the
USA that the Breez ventilation fan products will be
free from defects in material or workmanship. This
warranty is limited to three (3) years from the original
date of purchase.
Limitations and Exclusions
1. During the warranty period, a replacement for
any defective product will be supplied free of
charge for installation by the consumer. The
warranty provided herein does not cover charges
for labor or other costs incurred in the
troubleshooting, repair, removal, and installation
service.
2. All returns of defective parts or products must
include the product model number, and must be
made through an authorized Delta Electronics
distributor. Authorized returns must be shipped
prepaid. Repaired or replacement products will
be shipped by Delta Electronics F.O.B. shipping
point.
3. Delta Electronics shall not be liable for any
indirect, incidental, consequential, punitive, or
special damages arising out of or in connection
with products use or performance, regardless of
the form of action whether in contract, tort
(including negligence), strict product liability or
otherwise.
4. This warranty does not extend to fluorescent
lamp starters and tubes.
5. The warranty does not cover if user does not
comply with manufacture’s installation manual.
6. To qualify for warranty service, you must notify
Delta Electronics at the address or telephone
number below.
7. Delta Electronics shall have no liability to the
original owner-user with respect to any defect
caused by abuse, misuse, neglect, improper
transportation or storage, improper testing,
improper installation, improper operation,
improper use, improper maintenance, improper
repair, improper alteration, improper modification,
tampering or accident of products or parts
thereof, or unusual deterioration or degradation of
products or parts thereof due to a physical
environment beyond the requirements of
products’ specifications.
Address:
46101 Fremont Boulevard, Fremont, CA 94538
US Toll Free Number:
1-888-979-9889 - Technical Support
1-877-685-4384 - Customer Sales Support
Model No.
Volt/Hz
Air Flow
@0.1”SP
(CFM)
Power
@0.1”SP
(W)
Max
Current
(Amps)
Weight
(lb.)
LED Light
Spec
ITG80RLED-ADJ 120/60
80
11.5
0.28
7.7
13Wa�s
1000Lumens
2700K
4000K
5000K
Nail
Tabs
Fig. F
Fig. G
Fig. H
Joist or
wall stud
Inside
Outside
Ceiling
Gradient
1°~2°
Fan Body
Duct
Grille
Fig. C-1
Fig. D
Open Used Hole
Fig. C-2
Fig. E
JUNCTION BOX
SWITCH BOX
OFF
ON
HI
BLACK
POWER SWITCH
L
L
N
N
GRD
WHITE
LIGHT SWITCH
RED
WHITE
GREEN
SWITCH BOX
ON/OFF SWITCH
(purchase separately)
POWER
SWITCH
RED
BLACK
GROUND
(bare)
120 VAC
LINE IN
WHITE
WIRING
PLATE
LIGHT
SWITCH
