background image

6

PARTS, SERVICE OR WARRANTY ASSISTANCE

To obtain additional information regarding this product or to obtain parts, service or warranty
assistance, please call or fax the following toll free number. Highly qualified and experienced
Customer Service Representatives are standing by to assist you.

Biesemeyer

®

 Manufacturing

4825 Highway 45 North

Jackson, TN
38305

         

                        

 

 Phone

    Toll Free

   

               

(

731

660

-

5986

         (800) 782-1831       

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine
accessory which in normal use has proven to be defective in workmanship or material, provided that the cus-
tomer notifies his supplying distributor of the alleged defect within two years from the date of delivery to him, of
the product and provides Delta Machinery with reasonable opportunity to verify the defect by inspection. Delta
Machinery may require that electric motors be returned prepaid to the supplying ddistributoror authorized ser-
vice center for inspection and repair or replacement. Delta Machinery will not be respponsible for any asserted
defect which has resulted from misuse, abuse or repair or alteration made or specificallyauthorized by anyone
other than an authorized Delta service facility, or representative. Under no circumstances will Delta Machinery
be liable for incidental or consequential damages resulting from defective products. This warranty is Delta
Machinery’s sole warrantyand sets forth the customers exclusive remedy to defective products;all other warran-
ties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed
by Delta.

Summary of Contents for BIESEMEYER 78-939









Reviews: