22
Chapter 3 Operation
3.5 UPS Setting
There are three parameters to set up the UPS.
Parameter 1
Parameter 2
There are two parameters to set up
the UPS.
Parameter 1: It’s for program alterna-
tives. Refer to below table.
Parameter 2 is the setting options or
values for each program.
z
z
01: Output voltage setting
Parameter 2:
Output voltage
You could choose the following output voltage:
200:
presents output voltage is 200Vac
208:
presents output voltage is 208Vac
220:
presents output voltage is 220Vac
230:
presents output voltage is 230Vac (Default)
240:
presents output voltage is 240Vac
Summary of Contents for Amplon MX Series
Page 40: ...Version Date 2019_06_19...