15
Amplon
RT
Series
1. There are an upper cover at the rear of the UPS and three knockout covers on
UPS’s rear panel, remove them as shown in
Figure 6-1
. After removing them,
you can see the UPS wiring terminals from the top.
(Figure 6-1: Remove the Upper Cover at the Rear of the UPS and the Three
Knockout Covers from the UPS’s Rear Panel)
2. Please follow step
❶
to step
❸
below to connect the three power cables to the
UPS wiring terminals (the AC input terminals, the bypass input terminals, the UPS
output terminals and the grounding terminal). Use three cable glands (user-
supplied) to firmly fix the cables on the UPS.
Step
❶
: Fix the AC input power cable (4 pins) on AC input terminals of UPS.
Please note that the 4 pins of the main input power cable should be connected to
the right position of terminals (mL1, mL2, mL3 and N) as shown in
Figure 6-2
.
Summary of Contents for Amplon MBB RT Series
Page 40: ...5013275001 ...
