10
1) In the Cooling or Dry mode, after the unit receives the Sleep command from the wireless
controller (for the duct type or ultra-thin duct type indoor unit, the command is transmitted by the
wired controller) and runs for one hour, the preset temperature will increase by 1°C and by 1°C after
another two hours. After that, the unit will run at this temperature.
2) In the Heating mode, after the unit receives the Sleep command from the wireless controller (for
the duct type or ultra-thin duct type indoor unit, the command is transmitted by the wired controller)
and runs for one hour, the preset temperature will decrease by 1°C and by 1°C after another two
hours. After that, the unit will run at this temperature.
Note: The Sleep setting is shown as Fig. 7.3 and this function is unavailable in the Dry mode.
7.4 Swing
The swing function will start by pressing “SWING” and stop by another press.
See Fig. 7.4 for how to set the swing function.
SWING
ROOM TEMP
SWING
Fig. 7.4
Note: this function is unavailable for the duct type and ultra-thin duct type indoor unit.
7.5 FAN
SWING
ROOM TEMP
Fig. 7.5