14
T R A N S P O R TATION A N D STO R A G E
Fig. 29
Fig. 30
Fig. 28
1.
The dust collector features a convenient carrying
handle with rubber grip (A) Figs. 28 and 29, which allows
the unit to be carried easily from one job area to another.
I M P O R TA N T: T H E D U S T C O L L E C TO R W E I G H S
APPROXIMATELY 39 LBS. CARE S H O U L D B E TA K E N
W H E N LIFTING A N D TRANSPORTING T H E MACHINE.
2.
In addition to the carrying handle, the machine
features a welded mounting bracket (B) Fig. 28, with hole
for mounting the dust collector to a wall or wooden sup-
port (when not in use) as shown in Fig. 30. Two rubber
feet (C) Fig. 28, on the tubular frame helps support the
unit for storage and prevents damage to wall or support-
ing surface. IMPORTA N T:A LW AY S use safety gates to
cover dust ports when the dust collector is not in use or
mounted to a supporting surface for storage.
M A I N T E N A N C E
NOTE: Before any maintenance or service is performed, be sure the dust collector is discon-
nected from the power source to prevent accidental starting and the safety gates closed. All main-
tenance other than the items recommended in this manual should be performed by an authorized
Delta Service Center.
1.
IMPORTA N T:Always disconnect the machine from the power source before performing any
maintenance procedures.
2.
The condition of the dust bag should be checked periodically for damage and emptied on a
regular basis. Do not transport the machine with a full dust bag.
3.
Clean and apply a dry silicone lubricant monthly to the impeller to remove any dirt or build-up
of pitch, gum and wood shavings.
A
C
B
