15
ATTACHING THE DUST COLLECTOR BAG
1. Insert the dust collector bag hanger (A) Fig. 34 in
the two holes (B) in the top of the cabinet.
2. Place the end of the dust collector bag (C) Fig. 35
over the dust collector hanger (A).
3. Place a hose clamp (D) Fig. 36 over the intake port
of the dust collector bag (C). Slide the intake port
of the dust collector bag over the dust chute (E).
Tighten the hose clamp around both the bag (C)
and the chute (E).
NOTE: Review the section “DUST PORT COVER” before operating the dust collector.
Disconnect the machine from the power source!
Fig. 34
Fig. 35
Fig. 36
B
A
C
A
C
E
D
OPERATION
OPERATIONAL CONTROLS AND ADJUSTMENTS
STARTING AND STOPPING THE UNIT
To start the machine, push the “START” button (A) Fig. 37. To stop the machine, push the “STOP” button (B).
IMPORTANT: When the machine is not in use, the switch should be locked in the "OFF" position using a padlock (C)
Fig. 38, with a 3/16" diameter shackle to prevent unauthorized use.
Make sure that the switch is in the “OFF” position before plugging cord into outlet. Do not touch the
plug’s metal prongs when unplugging or plugging in the cord.
In the event of a power outage (a breaker or fuse trip), always move the switch to the “OFF”
position until the main power is restored.
A
B
C
Fig. 37
Fig. 38
